Parr’s Danish Oil is Voc free and contains no harmful solvents or metal dryers. It contains 100% of polymerised linseed oil which gives your woodwork a pure natural hard wearing finish.

A superior penetrating linseed oil which is suitable for all internal woodwork, wooden toys and any surface in contact with food. Fantastic for chopping boards, salad bowls and wooden utensils.

Our danish oil gives wood a natural open grained look with a low lustre bringing out the natural beauty of the wood.

How to apply Danish Oil

Wood Preparation. All unfinished wood pieces should be prepared by sanding before applying a finish to it and removal of all dust particles. Sanding will reduce surface scratches on the wood which will minimize drying time and will also provide a more even sheen. We recommend finishing with 320 grit or higher for all our oils.

Apply a very thin even coat to the wood with a lint free cloth at room temperature .Put a small amount of oil onto the cloth and begin working the oil onto the surface working your way over the entire piece occasionally adding more oil to your cloth. It is very important that only a small amount of oil is used and must be well worked into the piece. Leave for a minimum of 15 minutes and after the oil has soaked into the surface rub with a clean lint free cloth briskly until the surface feels dry with no oil residue left. The surface will be dry but feel oily to touch. Allow the Danish Oil to cure for a min of 8 hours Before applying the second coat burnish(rub) the surface with 0000 steel wool until silky smooth and ensure the surface is clean with the use of a tack cloth. Proceed to apply the 2nd and 3rd coats. For a deeper shine apply additional coats.